Call 08048956350 83% Response Rate

Send Enquiry

our range

Ball Bearing

Leading Manufacturer of self aligning ball bearings, thrust ball bearing, deep groove ball bearing, single row angular ball bearing, angular contact ball bearing and double row angular ball bearing from Ahmedabad.
  • Self Aligning Ball Bearings
  • Self Aligning Ball Bearings
  • Self Aligning Ball Bearings
  • Self Aligning Ball Bearings
  • Self Aligning Ball Bearings
Self Aligning Ball Bearings

Self Aligning Ball Bearings

Rs 210  / UnitGet Best Price

Minimum Order Quantity: 100 Unit

Product Brochure

Usage/ApplicationFor Applications Where Aligning The Shaft And Housing Is Difficult
Seal TypeMetal Shields
Dimension57 mm
Number Of RowsSingle Row
Weight100 g
MaterialStainless Steel
Outer GrooveWith Snap Ring
ApplicationIndustrial
Type Of BearingSelf Aligning
Detail:
  • Self Aligning Ball Bearing are double row, non-separable components, composed of outer rings with concave raceways. In this way, their angle can be adjusted and they are resistant to angular misalignments or shaft deflections. The bearings are available as open and sealed units.
  • Low or medium speed application Carry radial load, but not suitable for axial loads. Accommodating misalignments

JKT Bearings Offerings:
  • 1200,1300,1400, 2200, 2300 in C2, C3, C4 clearances

Price Range: Rs.75-45000/unit

View Complete details

get quote request a call back
  • Thrust Ball Bearing
  • Thrust Ball Bearing
  • Thrust Ball Bearing
  • Thrust Ball Bearing
Thrust Ball Bearing

Thrust Ball Bearing

Rs 75  / UnitGet Best Price

Minimum Order Quantity: 100 Unit

Product Brochure

Bearing TypeThrust Ball Bearing
Load directionSingle Direction
Seal TypeMetal Shields
Usage/ApplicationUsed In Low Thrust Applications Where There Is Little Axial Load
MaterialStainless Steel
ApplicationAutomobile
Surface FinishingChrome Polished
ShapeRound
Bore Size15 mm
Outer Diameter52 mm
Detail:
  • They need less axial space than double Range row angular contact bearings. The contact angle is 35 degree & two parts l/R are easy to assemble & provide a high load carrying capacity.
  • Thrust ball bearings are composed of shaft washers, cage washers, and cage assemblies. The bearings are separable; cage assembly and bearing washers can therefore be fitted independently of each other. Both models tolerate high axial forces, however, they may not be radially stressed.

JKT Bearings Offerings:
  • 511XX, 512XX, 513XX, 522XX, 523XX, 524XX
  • DLJT, DMJT, (Inch & mm) Also available in Steel and Brass cage.

Price Range: Rs.75-45000/unit

View Complete details

get quote request a call back
  • Deep Groove Ball Bearing
  • Deep Groove Ball Bearing
  • Deep Groove Ball Bearing
  • Deep Groove Ball Bearing
  • Deep Groove Ball Bearing
Deep Groove Ball Bearing

Deep Groove Ball Bearing

Rs 170  / UnitGet Best Price

Minimum Order Quantity: 100 Unit

Product Brochure

Bearing TypeDeep Groove Ball Bearing
BrandJKT
Seal TypeMetal Shields
Usage/ApplicationCommonly Used In Electric Motors And In Household Appliances
Number Of RowsSingle
MaterialStainless Steel
Outer GrooveWith Snap Ring
ShapeRound
Bore Size10 mm
Surface FinishingChrome Polished
Outer Diameter56 mm
Detail:
  • Deep Groove Ball Bearing are wide ranging, non-separable bearings with solid outer rings, inner rings and bearing housings. These simply built products, steadfast in operation and maintenance friendly, are available as single and double row as well as sealed and open. In technical production, open bearings can have a recess on the outer ring for seals or cover rings. Due to their low moment of friction, deep groove ball bearings are suited to high speeds.
  • Single and double row ball bearings are the most utilised anti-friction bearing. They are simple in construction, non-separable, suited to high speeds and unsusceptible in operation and maintenance. Narrow lubrication between running grooves and balls.
  • Single row deep groove ball bearings tolerate radial and axial forces. Double row deep groove ball bearings have filling grooves, and can therefore only transmit low axial forces.

     

JKT Bearings Offerings:
  • Single row deep groove ball bearings: 6800, 6900, 16000, 6000, 6200, 6300, 6400,62000, 62300,63000, 61800, 61900,6200, 6300 - Also in EMQ [Electric Motor Quality]
  • As per ISO grade P0 ABEC1 And as per ISO Grade P6 ABEC3
  • 6300 Series - Medium Series Ball Bearings – Ideal for heavier load capacity applications
  • Dimension as per ISO standard, DIN standard and ISI standard.
  • Double row deep groove ball bearings: 4200, 4300 with Z, 2Z shield and with Rubber seal RS, 2RS snap ring groove and snap ring
  • For radial clearance C2, CN, C3, C4, C5
  • RLS, RMS, XLJ Available
  • Cage type riveted of steel and brass steel, machined brass cage, polyimide.

    Price Range: Rs.75-45000/unit

    View Complete details

    get quote request a call back
    Single Row Angular Ball Bearing

    Single Row Angular Ball Bearing

    Rs 350  / PieceGet Best Price

    Minimum Order Quantity: 100 Piece

    Product Brochure

    Bearing TypeAngular Contact Ball Bearing
    Bore Size10 mm
    Seal TypeMetal Shields
    Usage/ApplicationGearboxes, Pumps, Electric Motors, And Clutches And Other High-speed Applications
    Number Of RowsSingle Row
    Outer Diameter54 mm
    MaterialStainless Steel
    ShapeRound
    Surface FinishingChrome Polished
    BrandJKT
    • Being a well-established organization, we are engaged in offering a distinguished range of Single Row Angular Ball Bearing
    • The Single Row Angular Contact Ball Bearing have higher axial load capacity than the Single Row Radial ball bearings.
    • The bearings can carry axial load in one direction only and are to adjusted against another bearing, if axial load is coming from both the directions. Each bearing can be located endwise in one direction only.
    • These bearings, when mounted in a duplex arrangement, provide axial and/or radial rigidity in applications where control of shaft displacement is essential.

    JKT Bearings Offerings:
    • Single Row Angular Contact Ball Bearing: 7000, 7200, 7300, 7400 (Available in Steel, Brass & Polyamide Cages)

    Price Range: Rs.75-45000/unit

    View Complete details

    get quote request a call back
    • Angular Contact Ball Bearing
    • Angular Contact Ball Bearing
    Angular Contact Ball Bearing

    Angular Contact Ball Bearing

    Rs 110  / UnitGet Best Price

    Minimum Order Quantity: 100 Unit

    Product Brochure

    Bearing TypeAngular Contact Ball Bearing
    Bore Size18 mm
    BrandJKT
    Usage/ApplicationCommonly Used In Gearboxes, Pumps, Electric Motors
    Seal TypeMetal Shields
    Number Of RowsSingle Row
    Outer Diameter62 mm
    MaterialStainless Steel
    Outer GrooveWith Snap Ring
    ApplicationIndustrial
    ShapeRound
    Surface FinishingChrome Polished
    Being a well-established organization, we are engaged in offering a distinguished range of Angular Contact Ball Bearing.

    Suitable For:
    • High accuracy and high-speed application
    • Accommodating combined load i.e. axial and radial load
    • High load carrying capacity
    • Quiet and low friction

    Specification:
    • 7000, 7200, 7300, 7400, ALS, AMS

    Features:
    • High durability
    • Impeccable finish
    • Easy installation

    Price Range:Rs.75-45000/unit

    View Complete details

    get quote request a call back
    Double Row Angular Ball Bearing

    Double Row Angular Ball Bearing

    Rs 200  / UnitGet Best Price

    Minimum Order Quantity: 100 Unit

    Product Brochure

    Bearing TypeAngular Contact Ball Bearing
    Seal TypeMetal Shields
    Usage/ApplicationSupport Axial Loads In Both Directions And High Radial Loads
    Number Of RowsDouble Row
    MaterialStainless Steel
    Bore Size14 mm
    ShapeRound
    Surface FinishingChrome Polished
    Diameter53 mm
    Country of OriginMade in India
    Detail:
    • Double Row Angular Contact ball bearings have raceways in the inner and outer rings that are displaced with respect to each other in the direction of the bearing axis. This means that they are designed to accommodate and simultaneously action axial and radial loads. Due to angular contact the axial load carrying capacity of angular contact ball bearings increases as the contact angle increases. The contact angle is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane along which the load is transmitted from one raceway to another, and a line perpendicular to the bearing axis. These bearings can accommodate thrust in both the directions. The chief advantages of the double row type are rigidity, compactness and high capacity.
    • High accuracy and high-speed application Accommodating combined load i.e. axial and radial load High load carrying capacity Quiet and low friction

    JKT Bearings Offerings:
    • Double row angular contact ball bearing 3200, 3300, 5200, 5300

    Price Range: Rs.75-45000/unit

    View Complete details

    get quote request a call back
    • Four Point Contact Ball Bearing
    • Four Point Contact Ball Bearing
    • Four Point Contact Ball Bearing
    Four Point Contact Ball Bearing

    Four Point Contact Ball Bearing

    Rs 180  / UnitGet Best Price

    Minimum Order Quantity: 100 Unit

    Product Brochure

    Usage/ApplicationPumps, Retarders, Compressors, Industrial Or Automotive Gearboxes
    MaterialStainless Steel
    Surface FinishingChrome Polished
    Bore TypeFour Point Contact
    Product BrandJKT
    Bore Size11 mm
    Outer Diameter55 mm
    Country of OriginMade in India
    • Being a well-established organization, we are engaged in offering a distinguished range of Four Point Contact Ball Bearing.
    • This bearing contains solid outer ring, split inner ring and ball and cage assembly. Two-piece inner rings allow large complement of ball to accommodate.
    • These bearings are not suitable for miss alignment in housing or shaft deflection. Also these bearings are not sealed.

    JKT Bearings Offerings:
    • QJ2XX, QJ3XX
    • QL, QM, LDJT & MDJT Series

    Price Range: Rs.75-45000/unit

    View Complete details

    get quote request a call back
    • Mini Ball Bearing
    • Mini Ball Bearing
    • Mini Ball Bearing
    Mini Ball Bearing

    Mini Ball Bearing

    Rs 155  / UnitGet Best Price

    Minimum Order Quantity: 100 Unit

    Product Brochure

    FinishingPolished
    Usage/ApplicationCarries Loads, Reduces Friction And Positions Moving Machine Parts
    MaterialStainless Steel
    ShapeRound
    BrandJKT
    Bore TypeMini Ball Bearing
    Bore Size16 mm
    Outer Diameter60 mm
    Country of OriginMade in India
    A mini ball bearing is a compact, precision-engineered bearing designed for small-scale applications where space and weight are critical considerations. Typically featuring outer diameters ranging from a few millimeters to a few centimeters, these bearings utilize small steel balls or ceramic balls to minimize friction and facilitate smooth rotational movement.

    Price Range
    :Rs.75-45000/unit

    View Complete details

    get quote request a call back

    EXPLORE MORE CATEGORIES